The essential component adds stable minerals to the water and creates a mineral water bathing environment. You’ll notice the difference in the water immediately. The operation of the program requires these minerals to be present in the pool water. One bag per 1,000 gallons of pool water is added at start-up or as needed during spring opening to obtain the proper mineral level. It is proprietary blend of elements only offered from BioGuard.
	This essential product is added weekly at a rate of 1 bag per 20,000 gallons to replenish mineral levels. Minerals may be lost through backwashing, dilution, splash-out, and other causes. Renewal is added weekly to replenish lost mineral levels and rejuvenate the program. Like Beginnings, Renewal contains pH balancers; and adjusters are added to offset pH drift along with chelants and scale inhibitors. All of this helps prolong the life span of the Mineral Springs electrolytic cell. But the benefits continue! A filter aid and clarifier are blended into Renewal to maintain crystal clear water along with a clean fragrance.
The MS-10 treats in-ground residential pools (up to 40,000 gallons) or commercial pools (up to 25,000 gallons). The MS-10 model can be hardwired either 120 VAC or 240 VAC.
Adjust the dial to regulate the electrolytic generation of the sanitizer.
Sanitizer boost button when pressed will produce sanitizer for 24 hours while pump is operating or until power is turned off to the pump, whichever comes first.
Self-cleaning mechanism to help avoid scale build-up.
Low mineral shut-off to protect the cell if the mineral residual drops below the recommended level.
UL approved.
Interfaces with Jandy Aqua Link System and are NSF-listed.
5-year limited warranty, and Pool Emporium Inc is proud to be a warranty station!
		A temperature sensor and mineral level sensor are built into the electrolytic cell. The cell and flow switch are plumbed into the pool return piping. The flow switch informs the controller that water is flowing and the chlorine generation process can start. The temperature and mineral level sensors keep the Mineral Springs controller calibrated regardless of pool temperature. The cell contains a series of specially coated electrode plates where the sanitizer generation process occurs.
NOTE: With all pool care products, avoid physical contact. Follow safety information on label instructions. Open in well-ventilated area. Avoid breathing fumes. Store in a cool, dry place. Keep out of the reach of children.